Millennium Cyclone 5/15 VS Plus Pump Cart

• Lightweight and portable
• Clean, contained delivery system
• Quick and easy application
• Solid core tires
• Adjustable gun assembly
• Dual pump system
• Single aperture

• Easy to maneuver
• Applicator and hoses stay clean and free flowing, low maintenance
• Perfect for large congested rooftops
• Prevents flat tires
• Ergonomic design
• Reduces risk of catastrophic pump failure and lowers maintenance cost
• Easy connections

• Close manifold valves.
• Turn off power.
• Remove static mixing tip and retaining nut (if needed) and discard.
• Relieve any pressure in hoses by opening and closing applicator valves.
• Pump a non-lithium grease into both grease fittings on the gun manifold until it flows out of the tip. Install grease into the Part 1 (A) grease fitting first.
• Caution: Remove static mixing nozzle during any pause in application or operation. Do not allow pressure to build up in the static mixing nozzle. If static mixing nozzle remains on applicator manifold, material can react and harden in the manifold and possibly the ends of the hoses. During removal and attachment of static mixing nozzles, a wrench may be necessary for removal. Clean manifold threads and re-grease frequently.

• Do not apply to wet or damp surfaces.
• Not recommended for use with insulation boards larger than 4’ x 4’ (1.2m x 1.2m).
• Do not use warped or curled insulation boards. All insulation boards must lay flat upon the roof surface.
• Pump grade adhesives are designed for application temperatures of 40°F and above.

• All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven. In recover applications Millennium Surface Treatment or Millennium Universal Primer may be required.

Ribbon Application

• 5 Gallon (18.9L) Kit: 2,500-3,000 sq. ft. (232m²-279m²)
• 15 Gallon (56.7L) Kit: 7,500-9,000 sq. ft. (697m²-836m²)

Controlled Low-Pressure Spray Application

• 5 Gallon (18.9L) Kit: 1,300-1,800 sq. ft. (121m²-167m²)
• 15 Gallon (56.7L) Kit: 3,900-5,400 sq. ft. (362m²-502m²)

Coverage estimates indicate total square feet of insulation/membrane attachment per kit. Rates are based on an application pattern of four 1/2” - 3/4” (1.3cm - 1.9cm) beads spaced 12” (30cm) o.c. per 4’ x 4’ (1.2m x 1.2m) insulation board.

Note: A 1/2” - 3/4” (1.3cm - 1.9cm) wide uncured adhesive bead will produce a 2” - 3” (5.1cm - 7.6cm) wide cured adhesive bead that will rise approximately 3/4” - 1” (1.9cm - 2.5cm) above the substrate. Coverage rates may be lower when used over irregular surfaces and will vary depending on roughness.

Ribbon Application

• 5 Gallon (18.9L) Kit: 2,500-3,000 sq. ft. (232m²-279m²)
• 15 Gallon (56.7L) Kit: 7,500-9,000 sq. ft. (697m²-836m²)

Controlled Low-Pressure Spray Application

• 5 Gallon (18.9L) Kit: 1,300-1,800 sq. ft. (121m²-167m²)
• 15 Gallon (56.7L) Kit: 3,900-5,400 sq. ft. (362m²-502m²)

Coverage estimates indicate total square feet of insulation/membrane attachment per kit. Rates are based on an application pattern of four 1/2” - 3/4” (1.3cm - 1.9cm) beads spaced 12” (30cm) o.c. per 4’ x 4’ (1.2m x 1.2m) insulation board.

Note: A 1/2” - 3/4” (1.3cm - 1.9cm) wide uncured adhesive bead will produce a 2” - 3” (5.1cm - 7.6cm) wide cured adhesive bead that will rise approximately 3/4” - 1” (1.9cm - 2.5cm) above the substrate. Coverage rates may be lower when used over irregular surfaces and will vary depending on roughness.

Millennium PG-1 Fleeceback Membrane Adhesive and Low Viscosity Insulation Adhesive Kit:

• Part 1 (A): 5 gallon (18.9L) Box – PG-IA5B-A01
• Part 2 (B): 5 gallon (18.9L) Box – PG-IA5B-B01

Millennium PG-1 Fleeceback Membrane Adhesive and Low Viscosity Insulation Adhesive Kit:

• Part 1 (A): 5 gallon (18.9L) Box – PG-IA5B-A01
• Part 2 (B): 5 gallon (18.9L) Box – PG-IA5B-B01