HS Butyl Bathtrim

• Excellent adhesion to ceramic tiles, baths, and showers.
• Resistant to mould growth.
• The product is highly conformable.
• Easy and accurate to use with little waste and no mess.
• Smooth, wipe-clean surface.

For sealing around baths, sinks and worktops to prevent water ingress.

Surface preparation

• All surfaces should be clean, dry, and free from frost, grease, and loose materials.

• When cleaning contaminated substrates, HS Butyl recommends using propan-2-ol (IPA) and allowing it to dry before applying the tape.

• Do not use white spirit or household cleaners, as they can leave a residue that prevents the bath trim from bonding to the wall, bath, or worktop.

Application

• Cut a strip long enough for the joint to be sealed.

• Fold the tape along the hinge.

• If joining at wall corners, cut a triangle off the horizontal piece at a 45° angle where the join will be made.

• Remove the release film in short lengths and apply the tape to the joint, ensuring the hinge is placed right into the back of the joint.

• When the vertical and horizontal sides bond to their respective surfaces, they should lie flat against them.

• Ensure proper placement, as improper positioning may affect adhesion to one or both surfaces.

• Once in place, press the tape down firmly along its length to ensure good adhesion.

HS Butyl Bathtrim is normally supplied as individually packed rolls in a clampack. Roll length and packaging specifications should be agreed prior to purchase.

24 months when stored flat in original packaging in cool, dry conditions.