H.B. Fuller® HL-7519-XITG
1 of 389 products in this brandRTU Product Type: Hot Melt Adhesive
Application Area: Cigarette Filter Rod Seam, Tobacco Filter Rods
Features: Low Application Temperature
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Segment
Applications & Uses
- Application Instruction
-
Recommended application temperature: 275°F
- Applications and Usage Information
-
- Hot melt adhesive for cigarette filter rod seam.
- Recommended application temperature: 275°F
- Cleaning Instructions Consult the equipment manufacturer for cleanup procedures. After clean- up, flush the applicator thoroughly with hot melt to purge the system.
- Product Applications
-
Hot melt adhesive for cigarette filter rod seam.
- Suitable Substrates
-
Tobacco filter rods.
Features
- Ready-to-Use Product Features
Features & Benefits
- Characteristics
-
- Low application temperature
- Medium set time
- Product Characteristics
-
- Low application temperature
- Medium set time
Packaging & Availability
- Regional Availability
Properties
- Suitable Substrates
-
Tobacco filter rods.
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 275 °F - Color (molten) 1 - 5 Gardner - Softening Point 180 - 200 °F Mettler Speed of Set (relative) Medium - - Storage Temperature 20 - 100 °F - Viscosity (at 250°F) 1930 cPs - Viscosity (at 275°F) 970 - 1240 cPs - Viscosity (at 300°F) 800 cPs -
Safety & Health
- Safety Information
-
To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.
Storage & Handling
- Storage Conditions
-
Clean and dry conditions above 20°F and below 100°F.
- Storage and Shelf Life Conditions
-
- Clean and dry conditions above 20°F and below 100°F.
- Shelf Life: 730 days
- Shelf Life
-
730 days