Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Characteristics
- Molten transparent and odourless
- Lower viscous with good machinability
- Allows clean cut-off and exact positioning
- Good heat stability reduces maintenance and interruptions
- Some hot tack and good initial strength by very fast setting
- Bonds a lot of difficult surfaces with higher efficiency
- Wide service temperature range
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Segment
- Typical Applications
- This universal adhesive is used for packaging applications like case & carton sealing, closing of folding boxes or sift proof and the tray erection, as well as for straw attachment and ream wrapping.
- It is suitable for difficult to bond surfaces, even deep freeze applications. The lower viscosity enables the using at lower application temperature in case of temperature sensitive substrates or to reduce energy costs.
- Application Instructions
- Apply by nozzle, Dauber finger system. Application temperature: 135°C – 170°C Open time: short – medium Set time: very fast The fast-setting fits to fast production lines but can be varied by line parameters like application temperature and amount.
- This hot melt is not compatible with conventional hot melts. If other adhesive types have been used before, the adhesive equipment must be thoroughly flushed and cleaned. The prills product format is suitable for use in automatic feeder systems.
- Push bags to loosen up granules to remove blocking due to storage before filling the reservoir and ensure surrounding does not exceed +35°C.
Properties
- Typical Properties
Value Units Test Method / Conditions Application Temperature 135 - 170 °C - Open Time Short - medium - - Density (at 23°C) approx. 0.98 g/cm³ - Softening Point (at 107°C) approx. 107 °C DIN 51801-2 Softening Point (at 107°C) approx. 107 °C Mettler Softening Point (at 111°C, Test method year 1999) approx. 111 °C ASTM E28 pH 3.8 - 4.8 - - Film Hard, elastic, dry - - Softening Point (at 111°C) approx. 111 °C Ring and Ball Test Viscosity (at 135°C, spindle 21, Test method version year 1988) approx. 1200 mPa.s ASTM D3236 Viscosity (at 135°C, spindle 21) approx. 1200 mPa.s Brookfield Viscometer Viscosity (at 175°C, spindle 21, Test method version year 1988) approx. 450 mPa.s ASTM D3236 Viscosity (at 175°C, spindle 21) approx. 450 mPa.s Brookfield Viscometer Viscosity (at 150°C, spindle 21, Test method version year 1988) approx. 850 mPa.s ASTM D3236 Viscosity (at 150°C, spindle 21) approx. 850 mPa.s Brookfield Viscometer Storage Temperature max. 35 °C - - Suitable Substrates
Case & cartons, folding boxes and trays, straw attachment and ream wrapping. Suitable for difficult to bond surfaces.
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 24 months
- Storage Conditions
In original sealed packaging protected from sun, dust, moisture, and elevated temperatures.