Isarcoll™ 5109

Identification

Chemical Family

Polychloroprenes

GBU

EA

RTU Product Type

Contact Adhesive,

1K (1 component) Adhesive,

Solventborne Adhesive

Categories

Markets → Automotive & Transportation → Applications → Automotive → Interior

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Contact Adhesives

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Reactive Adhesives

Applications

Application Area

Automotive Interior Trim

Application Method

Brush,

Spray

Compatible Substrates & Surfaces

Glass,

Metal,

Plastics,

Textiles,

Wood,

Polyurethane,

Cork,

Rubber

Applications & Uses

Processing Information

Preparation

• The surfaces to be bonded must be dry, clean, free of grease, free of dust and free of oil to ensure a reliable bonding.

Processing

• Apply adhesive evenly with a suitable application method on the two parts to be bonded. After the recommended waiting time (flash-off time) put the parts accurately together and press. The waiting time depends on the ambient temperature, thickness of the adhesive film and absorbency of the surfaces. The surfaces to be bonded should be placed together when the adhesive film is still slightly sticky but does not stick to the finger when it is pressed lightly. The parts have to be bonded together within the Contact bonding time. Bonding by activation: When the Contact bonding time is exceeded activate at activation temperature, join together and press.

Features

Ready-to-Use Product Features

Excellent Mechanical Strength,

Excellent Performance,

Very Good Heat Resistance

Features & Benefits

Product Features

• High heat resistance
• Very high contact bonding
• High mechanical strength

Packaging & Availability

Country Availability

China (Mainland)

Regional Availability

• Asia Pacific
• Europe
• North America
• Latin America
• India/MiddleEast/Africa (IMEA)

Physical Properties

Physical Form

Liquid

Properties

Typical Properties

	Value	Units	Test Method / Conditions
Density	0.85	g/cm³	-
Solid Content	21 : 27	%	-

Processing Parameters

	Value	Units	Test Method / Conditions
Activation Temperature (after exceeding the Contact bonding time)	70 - 80	°C	-
Consumption	100 - 250	g/m²	-
Contact Bonding Time	10 - 60	min	-
Flash off	5 - 10	min	-
Processing Temperature	15 - 25	°C	-
Storage Temperature	15 - 25	°C	-
Viscosity	1800	mPa·s	-

Storage & Handling

Storage Information

Isarcoll™ 5109 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature). High temperatures shorten the shelf life. Low temperatures temporary cause a higher viscosity.

Shelf Life

12 months

Technical Details & Test Data

Processing Information

Suitable Substrates	Rubber
	Plasticizer free plastics
	Various metals
	Cork
	Polyurethane (PUR)
	Glass
	Textile
	Wood
Consistency	Liquid
	Sprayable
Surface Requirements	Dry
	Clean
	Free of grease
	Free of dust
	Free of oil
Surface Cleaning	Isa Verdünner 111
	N-Heptane
Application Method	Spraying
	Brushing

• Cleaner for Tools Isa™Verdünner 111
• Undercooled adhesive - Adhesive thickens at temperatures below 5°C. It be used again after warming to room temperature and stirring