EY2536

Identification

Chemical Family

Epoxy & Epoxy Derivatives

GBU

EA

RTU Product Type

2K (2 component) Adhesive,

Epoxy Adhesive,

Reactive Adhesive,

Structural Adhesive

Categories

Markets → Automotive & Transportation → Applications → Transportation → Aerospace & Aviation

Markets → Automotive & Transportation → Applications → Transportation → Commercial

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → 2K Liquid Reactive Adhesives

Technologies → Adhesives & Sealants → Product Families → Functional Adhesives → Structural Adhesives

Applications

Application Area

Aerospace Leading Edge,

Aerospace Applications

Compatible Substrates & Surfaces

Metal,

Plastics,

Composites

Segment

Aerospace

Applications & Uses

General Instructions

Surfaces must be clean, dry and free from grease, oil, paint, wax and weak oxide films and other surface contaminants. Chemical etching, sanding or grit blasting often gives the best results. Bring both components to room temperature prior to mixing. Just prior to using, blend the two components, Part A and Part B, in the ratio above. Mechanical mixing is preferable, but should be carried out at slow speeds (<300 rpm), taking as little air as possible into the adhesive batch. Spread a thin layer of the mixed adhesive on one or both of the parts to be bonded. Once the adhesive is applied, no open time is necessary. The surfaces can be assembled immediately. Parts should be assembled while the adhesive is still wet to the touch before it sets. The individual parts, the ambient temperature and the adhesive itself will dictate the open time permitted.

Features

Ready-to-Use Product Features

Chemical Resistant,

Good Sagging Resistance,

Good Thermal Stability,

Light Weight,

Self Extinguishing,

Room Temperature Curing

Features & Benefits

Features and Benefits

• Excellent Sag Resistance
• Extremely Light Weight
• Excellent Chemical Resistance
• Self Extinguishing
• Excellent Bonding to Metals, Composites, Coatings, and Most Plastics
• Excellent Chemical Resistance
• Excellent Thermal Performance
• Room Temperature Cure

Packaging & Availability

Regional Availability

• Asia Pacific
• Europe
• North America
• Latin America
• India/MiddleEast/Africa (IMEA)

Physical Properties

Color (Properties)

Off White

Physical Form

Paste

Properties

Density:

510 kg/m³

Specific Gravity:

0.51

Specifications

DPM 5357-1, DPS 1.901 REV. M TYPE 1

Cured Properties

	Value	Units	Test Method / Conditions
Hardness	62	Shore D	ASTM D2240
Specific Gravity	0.51	-	-

Uncured Properties

	Value	Units	Test Method / Conditions
Cure Time (at 23°C, full uncured)	24	hours	-
Cure Time (at 66°C, full uncured)	2	hours	-
Gel Time (at 25°C, 100g)	45 - 65	minutes	-
Mix Ratio (by volume)	100:61	-	-
Mix Ratio (by weight)	100:50	-	-

Typical Properties

	Value	Units	Test Method / Conditions
Storage Temperature	12 - 25	°C	-

Component B

	Value	Units	Test Method / Conditions
Viscosity	1657000	cPs	-

Component A

	Value	Units	Test Method / Conditions
Viscosity	2750000	cPs	-

Appearance

Off white liquid paste

Storage & Handling

Storage Conditions

Product should be stored in a cool dry place out of direct sunlight. The shelf life is from date of manufacture. Shelf life is based on the products being stored properly at temperatures between 12°C and 25°C. Exposure to temperatures above 25°C will reduce the shelf life. This product should not be frozen.

Shelf Life

12 months (unopened)