Advantra® 9202

Identification

GBU

HHC

RTU Product Type

Hot Melt Adhesive

Categories

Markets → Printing & Packaging → Applications → Tapes, Labels & Adhesives → Case & Carton Sealing

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Hot Melt Nonreactive Adhesives

Applications

Application Area

Trays,

Cartons,

Case Sealing,

Folding Box,

Ream Wrapping,

Straw Attachment,

Deep Freeze Packaging

Application Method

Nozzle,

Dauber Finger System

Segment

Case and Carton Sealing

Applications & Uses

Application Instructions

• Apply by nozzle, Dauber finger system. Application temperature: 135°C – 170°C Open time: short – medium Set time: very fast The fast-setting fits to fast production lines but can be varied by line parameters like application temperature and amount.
• This hot melt is not compatible with conventional hot melts. If other adhesive types have been used before, the adhesive equipment must be thoroughly flushed and cleaned. The prills product format is suitable for use in automatic feeder systems.
• Push bags to loosen up granules to remove blocking due to storage before filling the reservoir and ensure surrounding does not exceed +35°C.

Typical Applications

• This universal adhesive is used for packaging applications like case & carton sealing, closing of folding boxes or sift proof and the tray erection, as well as for straw attachment and ream wrapping.
• It is suitable for difficult to bond surfaces, even deep freeze applications. The lower viscosity enables the using at lower application temperature in case of temperature sensitive substrates or to reduce energy costs.

Features

Ready-to-Use Product Features

Fast Setting,

Good Machinability,

High Efficiency,

Low Viscosity,

Odorless,

High Initial Strength,

Good Heat Stability,

Excellent Multi-Substrate Adhesion,

Low Maintenance,

Excellent Low Temperature Properties,

Wide Service Temperature Range,

Clean Cut-Off,

Hot Tack

Features & Benefits

Labeling Claims

Odor-free

Product Characteristics

• Molten transparent and odourless
• Lower viscous with good machinability
• Allows clean cut-off and exact positioning
• Good heat stability reduces maintenance and interruptions
• Some hot tack and good initial strength by very fast setting
• Bonds a lot of difficult surfaces with higher efficiency
• Wide service temperature range

Packaging & Availability

Regional Availability

• Asia Pacific
• Europe
• Global
• North America
• Latin America
• India/MiddleEast/Africa (IMEA)

Physical Properties

Film Appearance

Hard, elastic, dry

Properties

Suitable Substrates

Case & cartons, folding boxes and trays, straw attachment and ream wrapping. Suitable for difficult to bond surfaces.

Typical Properties

	Value	Units	Test Method / Conditions
Application Temperature	135 - 170	°C	-
Density (at 23°C)	approx. 0.98	g/cm³	-
Film	Hard, elastic, dry	-	-
Open Time	Short - medium	-	-
Softening Point (at 107°C)	approx. 107	°C	DIN 51801-2
Softening Point (at 107°C)	approx. 107	°C	Mettler
Softening Point (at 111°C)	approx. 111	°C	Ring and Ball Test
Softening Point (at 111°C, Test method year 1999)	approx. 111	°C	ASTM E28
Storage Temperature	max. 35	°C	-
Viscosity (at 135°C, spindle 21)	approx. 1200	mPa.s	Brookfield Viscometer
Viscosity (at 135°C, spindle 21, Test method version year 1988)	approx. 1200	mPa.s	ASTM D3236
Viscosity (at 150°C, spindle 21)	approx. 850	mPa.s	Brookfield Viscometer
Viscosity (at 150°C, spindle 21, Test method version year 1988)	approx. 850	mPa.s	ASTM D3236
Viscosity (at 175°C, spindle 21)	approx. 450	mPa.s	Brookfield Viscometer
Viscosity (at 175°C, spindle 21, Test method version year 1988)	approx. 450	mPa.s	ASTM D3236
pH	3.8 - 4.8	-	-

Storage & Handling

Storage Conditions

In original sealed packaging protected from sun, dust, moisture, and elevated temperatures.

Shelf Life

24 months