UltraShield EMB 25
1 of 21 products in this brandRTU Product Type: 1K (1 component) Coating, Waterborne Coating
Features: Chipping Resistance, Durable, Easy To Apply, Excellent Toughness, Flexible, Good Adhesion, Good Toughness, Good Weather Stability, High Durability, Non-Toxic, Oxidation Resistant, Peel Resistance, UV Resistant, Water-based, Waterproofing
Application Area: Balconies, Basement, Bathrooms, Bridges, Masonry, Roofs, Terraces, Tunnels, Underpasses
Compatible Substrates & Surfaces: Concrete, Masonry
Chemical Family: Acrylics & Acrylates
-
Type Document Name
-
Technical Data SheetUltraShield EMB 25 Technical Data Sheet
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
Applications
- Application Area
- Compatible Substrates & Surfaces
Applications & Uses
- Application Procedure
-
Surface Preparation: The substrate on which the coating will be applied has to be cleaned thoroughly of all contaminants which may affect the adhesion. All major repair works needs to be carried out with a suitable repair material prior to the application.
Priming: Apply a primer coat on the concrete surface using a brush or roller to seal the pores and stabilize the surface by diluting UltraShield EMB 25 with water (75:25 ratio). This will
help in boosting adhesion for the top coat. Allow it to dry completely before applying the acrylic coating.Application: Apply each coat of UltraShield EMB 25 at a coverage rate of 1 kg / m2 to attain a Dry Film Thickness of 0.50mm.
For best results, apply the coating with a brush, roofing broom or a squeegee. The application of the succeeding coats shall be carried out after the first coat dries off, after a waiting period of at least 8-10 hours.Curing: The coating shall be cured fully for 7 days to achieve its full mechanical properties.
- Product Applications
-
UltraShield EMB 25 is used as waterproofing and protective coating of the following structures:
- Concrete roofs both flat and sloped
- Terraces, balconies and domes
- Masonry and concrete walls
- Bathrooms and basements
- Metal profile roofs and asbestos roofs
- Polyurethane foam slabs and polyester built up roofs
- Tunnels, underpasses & concrete bridge decks
UltraShield EMB 25 has the unique property of adapting itself over the irregular contours of the deck and forming a waterproof and impervious blanket.
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Features
-
- Tough yet highly flexible.
- The thermal co-efficient of expansion is similar to concrete
- More durable than normal asphalt coating
- Superior adhesion properties ensure a durable bond
- Resistant to peeling, chipping, and/or separation
- Excellent durability. Is resistant to UV and weathering effects and does not lose ts properties over time
- Bonds very wel to concrete and most other substrates
- Easy to apply, no mixing required
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
-
20kg Pail
Properties
- Specifications
-
Value Units Test Method / Conditions Application Temperature 10 - 50 °C - Consistency Thixotropic Paste - - Coverage Rate 1 kg/m² - Crack Bridging Ability 2 mm ASTM C836 Density 1.05 - 1.15 g/cc ASTM D 1475 Dry Film Thickness (dry) 0.5 mm - Elongation at Break min. 1000 % ASTM D 412 Final Cure 7 days - Hardness 40 Shore A ASTM D 2240 Initial Cure 12 - 24 hours - Service Temperature -5 to 70 °C - Solid Content 55 % ASTM D 1644 Storage Temperature max. 25 °C - Tear Resistance min. 10 kN/m ASTM D 624 Tensile Strength min. 0.5 N/mm² ASTM D 638 Water Vapor Transmission max. 0.5 g/h-m² -
Storage & Handling
- Storage Conditions
-
- Shelf life is up to eight months from manufacturing date, if stored below 25 °C. Shelf life is up to twelve months from manufacturing date, if unopened, stored under cover, protected from direct sunlight and high temperature.
- Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
- Shelf Life
-
12 months