H.B. Fuller

Categories: Markets → Building & Construction → Applications → Building Materials → Wood

Markets → Building & Construction → Applications → Decorative Materials & Finishes → Carpet

Markets → Building & Construction → Applications → Flooring & Surfaces → Other Flooring & Surface Applications

Markets → HI&I Care → Applications → Home Care → Carpet & Upholstery

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Nonreactive Adhesives

Application Area: Floor,

Carpet Tile,

Felt Backed Carpet,

Fibre Bonded Carpet
Application Method: Spray
Compatible Substrates & Surfaces: Ceramic,

Concrete,

Plywood,

Oriented Strand Board (OSB),

Hardboard

Guidelines for Use

Preparation:(500ml)

Use in a well Ventilated Area.
Surfaces to be bonded should be clean, dry and dust free. If cleaning solvents are used, allow adequate time for drying and wipe surface with a clean cloth before applying adhesive.
Shake aerosol before use.

Application:

Hold the aerosol at approximately 70° to the surface.
Apply adhesive in 4-6 inch bands overlapping each band by roughly 50%, with a double coat applied to the edges. Move at a steady pace that provides an even coat of adhesive without allowing any material to puddle. For most applications, 80-100% adhesive coverage is required for full bond strength. On porous materials, a second coat of adhesive may be necessary.
Allow the solvents to evaporate from the adhesive (1-2 minutes depending on ambient temperature). To know when the adhesive is ready to bond, it should not transfer to a gloved hand when touched and should feel dry. Bonding the substrates before the solvents have been allowed to evaporate can cause solvent entrapment resulting in bond failures.
Place the floor covering into position and press firmly from the centre outwards, paying particular attention to the edges
After use, invert the can and spray to clear any adhesive from the valve/button.

Ready-to-Use Product Features: High Solids Content,

Tacky,

High Coverage,

Easy To Apply,

Non-Chlorinated

Product Features

Developed for holding carpet tiles: high-tack formulation
Economical adhesive: fast and easy application, with a high coverage (up to 500m² based on 5g per m² coat weight)
Product credentials: non-chlorinated adhesive

Country Availability

India

Regional Availability

Packaging Size

Available Sizes:

Typical Properties


	Value	Units	Test Method / Conditions
Application Temperature	15 - 25	°C	-
Base	Hydrocarbon	-	-
Coverage (500ml aerosol, dry coat weight of 25g/m²)	approx. 20	m²/L	-
Drying Time	1 - 2	minutes	-
Heat Resistance	65	°C	-
Open Time	1	hour	-
Solid Content	35 - 40	%	-
Storage Temperature	15 - 35	°C	-

Disposal Information

Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).

Storage & Shelf Life

Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.

Shelf Life

12 months

Tuskbond Tack200 - 500ml Aerosol