H.B. Fuller

Categories: Markets → Building & Construction → Applications → Building Envelope & Roofing → EIFS & Insulation

Markets → Building & Construction → Applications → Building Materials → Construction Adhesives

Markets → Building & Construction → Applications → Building Materials → Wood

Markets → Building & Construction → Applications → Decorative Materials & Finishes → Carpet

Markets → Building & Construction → Applications → Decorative Materials & Finishes → Wallcoverings & Decorative Laminates

Markets → Consumer Goods → Applications → Carpet & Upholstery

Markets → Consumer Goods → Applications → Furniture

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Contact Adhesives

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Nonreactive Adhesives

Application Area: Laminates,

Carpet Tile,

Gel Backed Carpet,

Synthetic Backed Carpet,

Felt Backed Carpet
Application Method: Spray
Compatible Substrates & Surfaces: Metal,

Plastics,

Elastomers & Rubbers,

Fibers & Fabrics,

Foam,

Concrete,

Cardboards,

Foils,

Plywood,

Chipboard,

Medium-Density Fibreboard (MDF),

Mineral Fiber,

Cement Screeds,

Sanded Surface,

Hardboard

Guidelines for Use

Preparation:(500ml)

Use in a well Ventilated Area.
Surfaces to be bonded should be clean, dry and dust free. If cleaning solvents are used, allow adequate time for drying and wipe surface with a clean cloth before applying adhesive.
Shake aerosol before use.

Application:

Hold the aerosol at approximately 70° to the surface.
Apply adhesive to both substrates in 4-6 inch bands overlapping each band by roughly 50%, with a double coat applied to the edges. Move at a steady pace that provides an even coat of adhesive without allowing any material to puddle. Spray one surface vertically the other horizontally. For most applications, 80-100% adhesive coverage is required for full bond strength. On porous materials, a second coat of adhesive may be necessary.
Allow the solvents to evaporate from the adhesive (1-2 minutes depending on ambient temperature). To know when the adhesive is ready to bond, it should not transfer to a gloved hand when touched and should feel dry. Bonding the substrates before the solvents have been allowed to evaporate can cause solvent entrapment resulting in bond failures.
Bring the two substrates together and apply a uniform pressure over the work piece, starting in the middle and working outwards. Pay particular attention to the edges.
After use, invert the can and spray to clear any adhesive from the valve/button.

Ready-to-Use Product Features: Good Bonding Strength,

High Performance,

Highly Versatile,

Water Resistant,

Fast Drying,

Long Open Time,

Easy To Apply,

Excellent Multi-Substrate Adhesion

Product Features

Country Availability

India

Regional Availability

Packaging Size

Available Sizes:

Typical Properties


	Value	Units	Test Method / Conditions
Application Temperature	15 - 25	°C	-
Base	Dichloromethane	-	-
Coverage (500ml aerosol, dry coat weight of 25g/m²)	5	m²/L	-
Curing Time (full cure)	24	hours	-
Drying Time	1 - 2	minutes	-
Heat Resistance	100	°C	-
Open Time	60	minutes	-
Solid Content	27	%	-
Storage Temperature	15 - 35	°C	-

Disposal Information

Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol)

Storage & Shelf Life

Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive. If the product sprays like a jet, the canister is too cold.
Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.

Shelf Life

12 months

Tuskbond ONE - 500ml Aerosol