Tuskbond Infusion 900 - 22L Canister
1 of 57 products in this brandTuskbond Infusion 900 - 22L Canister is a super tacky spray adhesive developed for holding heavy and thick mats in place during resin infusion processes. The product is extremely tacky and maintains its tack for long periods of time, making the product perfect for larger areas or deep crevices in the mould. Tuskbond Infusion 900 has a web spray pattern which provides a cross linking effect over the fibres of the reinforcement.
RTU Product Type: Adhesive
Compatible Substrates & Surfaces: Fibers & Fabrics, Fibre-reinforced Plastic (FRP), Glass-reinforced Plastic (GRP)
Application Method: Spray
Features: Fast Drying, Tacky
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
-
Applications
- Application Method
- Compatible Substrates & Surfaces
Applications & Uses
- Guidelines for Use
-
Preparation:(22 L)
- Use in a well Ventilated Area.
- Surfaces to be bonded should be clean, dry and dust free.
- Once the hose and gun has been attached to the canister, open the valve fully. Check the connection points for leaks at this time.
- On first use, the canister may initially take a few seconds to spray correctly. Spray initially onto on a scrap surface to ensure the spray pattern is correct for the application. The trigger restrictor on the gun can be used to set the spray to the required width.
Application:
- Hold the spray gun 8-10 inches away; perpendicular to the surface to be sprayed.
- Apply an even coating of adhesive across the surface.
- Before continuing, allow the solvents to flash off from the adhesive.
- For demanding applications, the adhesive can be applied to both surfaces to increase bond strength.
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Features
-
- Reduced project time: ultra fast drying
- Super high tack: developed to hold heavy and thick mats
- Suitable for large area applications
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Size
-
Available Size:
- 22L Canister
Properties
- Application Temperature:
-
15.0~25.0 °C
- Shelf Life:
-
12.0 months
- Solid Content:
-
35.0 %
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 15 - 25 °C - Base Hydrocarbon, Acetone, Pentane - - Coverage (22L) 24.55 m²/L - Drying Time 5 - 10 seconds - Open Time 1 hour - Solid Content 35 % - Storage Temperature 15 - 35 °C -
Storage & Handling
- Disposal Information
-
- Once the canister is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
- Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).
- Storage & Shelf Life
-
- Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
- Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.
- Shelf Life
-
12 months