Tuskbond HS350 - 22L Canister

Identification

GBU

BAS

RTU Product Type

Adhesive

Categories

Markets → Consumer Goods → Applications → Carpet & Upholstery

Markets → Consumer Goods → Applications → Furniture

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Nonreactive Adhesives

Applications

Application Area

Upholstery

Application Method

Spray

Compatible Substrates & Surfaces

Metal,

Plastics,

Wood,

Fibers & Fabrics,

Foam,

Expanded Polystyrene (EPS),

Polyethylen(PE) Foam

Applications & Uses

Guidelines for Use

Preparation:

• Use in a well Ventilated Area. 
• Surfaces to be bonded should be clean, dry and dust free. If cleaning solvents are used, allow adequate time for drying and wipe surface with a clean cloth before applying adhesive.
• Once the hose and gun has been attached to the canister, open the valve fully. Check the connection points for leaks at this time.
• On first use, the canister may initially take a few seconds to spray correctly. Spray initially onto on a scrap surface to ensure the spray pattern is correct for the application. The trigger restrictor on the gun can be used to set the spray to the required width.

Application:

• Hold the gun at 90° to the surface, approximately 4-6 inches away and apply a uniform coat of adhesive to the required substrates. Apply adhesive in 4-6 inch bands overlapping each band by roughly 50%, with a double coat applied to the edges. Move at a steady pace that provides an even coat of adhesive without allowing any material to puddle. For most applications, 80-100% adhesive coverage is required for full bond strength. On porous materials, a second coat of adhesive may be necessary.
• For one-way application, let adhesive dry for 30 seconds until tacky, and then press into position.
• For two-way application, spray both surfaces and allow to dry for 1-2 minutes before bonding.
• For temporary bonding, spray one surface and allow to dry for 1-2 minutes before bonding.

Features

Ready-to-Use Product Features

Good Bonding Strength,

High Solids Content,

Highly Versatile,

Tacky,

Fast Drying,

Easy To Apply

Features & Benefits

Labeling Claims

Chlorinated Solvents-free

Product Features

• Extremely tacky formulation: forms a strong bond quickly
• Economical: fast easy application, with a fast drying time
• Versatile: bonds a wide variety of materials
• Product credentials: free from all chlorinated solvents

Packaging & Availability

Regional Availability

• Europe
• India/MiddleEast/Africa (IMEA)

Packaging Size

Available Sizes:

• 22L Canister

Physical Properties

Physical Form

Aerosol

Properties

Application Temperature:

15.0~25.0 °C

Shelf Life:

12.0 months

Solid Content:

35.0 %

Typical Properties

	Value	Units	Test Method / Conditions
Application Temperature	15 - 25	°C	-
Coverage (22L, dry coat weight of 25g/m²)	approx. 4.77	m²/L	-
Drying Time	1 - 2	minutes	-
Heat Resistance	70	°C	-
Open Time	70	minutes	-
Solid Content	35	%	-
Storage Temperature	15 - 35	°C	-

Technical Data

	Value	Units	Test Method / Conditions
Base	Hydrocarbon, Acetone, Pentane	-	-

Storage & Handling

Disposal Information

Once the canister is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).

Storage & Shelf Life

• Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
• Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.

Shelf Life

12 months