Magik 8560

Identification

GBU

BAS

RTU Product Type

Insulation Adhesive,

Waterborne Adhesive

Categories

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Equipment & Parts

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Water-Based Adhesives

Applications

Application Method

Brush,

Roller,

Spray

Compatible Substrates & Surfaces

Metal,

Aluminum,

Fibers & Fabrics,

Galvanized Steel,

Polystyrene (PS),

Concrete,

Masonry,

Painted Surfaces

Applications & Uses

Application Procedure

The surface should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.

For wet bond application apply MAGIK 85-60 uniformly on the metal surface at 8-14 m2 /liter. While wet, apply pressure to assure intimate bond. For contact bond application apply MAGIK 85-60 uniformly on the metal surface at 8-12 m2 /liter. Coat the insulation surface at 3-5 m2 /liter.

Allow the adhesive to tack fully and allow the moisture to evaporate for 20-45 minutes, depending on the local environment. Position the two mating surface together and apply pressure to assure intimate bond.

Product Applications

• MAGIK 85-60 is recommended for bonding of fire rated duct fabric, low Density duct liner, duct wrap, & fibrous glass insulation to painted or unpainted steel, galvanized or aluminum surface.
• MAGIK 85-60 can also be applied as a contact bond adhesive, being applied to both surfaces in areas where water entrapment may be a problem such as polystyrene to metal.
• MAGIK 85-60 is ideal for bonding fibrous glass insulation to concrete, block and other masonry surface in building construction.
• MAGIK 85-60 can also be used for ASJ, FSK, PVDC and PVC Jackets.

Features

Ready-to-Use Product Features

Good Bonding Strength,

Good Weather Fastness,

Heat Resistance,

Low Emissions,

Low Smoke Emission,

Moisture Resistant,

UL Flame Rated,

Water-based,

Peel Resistance,

High Coverage,

Anti-Bacterial

Features & Benefits

Labeling Claims

Lead-free,

Non-Toxic,

Asbestos-free,

Non-Flammable,

Volatile Organic Compound (VOC)-free,

Mercury-free

Product Features

• Zero Flame spread and Smoke developed
• Excellent Bonding and Peel Off Strength
• Solvent Free Synthetic Elastomer Emulsion
• High Compatibility with Insulation Fiber & Fabric
• Moisture Resistant
• Excellent Coverage
• Weather Resistant
• Heat Resistant
• Non-Toxic

Packaging & Availability

Regional Availability

• India/MiddleEast/Africa (IMEA)

Packaging Information

20 Kg Plastic Pail

Physical Properties

Physical Form

Paste

Appearance

Cream Thixotropic Paste

Properties

Specifications

	Value	Units	Test Method / Conditions
Coverage Range (subject to surface condition)	3.75 - 6.25	m²/L	-
Density	1.10 - 1.30	kg/L	ASTM D 1475-98
Drying Time (set to touch)	10 - 15	minutes	ASTM D 1640
Drying Time (through dry)	15 - 120	minutes	ASTM D 1640
Service Temperature	- 25 to 100	°C	-
Solid Content	62 - 68	%	ASTM D 1644
Viscosity	10000 - 20000	cPs	ASTM D 2196
Volatile Organic Compound Content	max. 1	g/L	ASTM D 2369-98
Volatile Organic Compound Content (low emitting materials, adhesive and sealants)	max. 50	g/L	ASTM D2369-98

Typical Properties

	Value	Units	Test Method / Conditions
Storage Temperature	10 - 35	°C	-

Appearance

Cream thixotropic paste

Regulatory & Compliance

Quality Standards

NFPA 90A,

MIL-A-3316C,

NFPA 90B 25/50,

ASTM C916 Type II

Storage & Handling

Storage Conditions

• 12 months from date of manufacturing in original unopened containers.
• Store product (10°C - 35°C) for maximum storage life.
• Higher temperatures reduce normal storage life.
• Lower temperatures may cause increased viscosity of a temporary nature.
• Rotate stock on a “first in-first out” basis.
• Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.

Shelf Life

12 months

Thermal Properties

Flame Rating

UL 723