Intrafol™ 1175

Identification

GBU

BAS

RTU Product Type

2K (2 component) Coating,

Primer,

Solventborne Coating

Categories

Markets → Building & Construction → Applications → Building Materials → Wood

Markets → Consumer Goods → Applications → Furniture

Technologies → Ready-to-Use Products → Product Families → Paints & Coatings → Primers & Sealers

Applications

Application Area

Furniture,

Woodwork,

Panels,

Decorative Edges

Application Method

Roll Coater

Compatible Substrates & Surfaces

Wood,

Composites,

Polyvinyl Chloride (PVC)

Applications & Uses

Processing Information

Preparation

• The surfaces to be bonded must be dry, free of grease, free of dust and free of oil.

Processing

• Apply a thin and homogenous coat of Intrafol™ 1175 on the plastic surface and dry the applied film. Refer to the technical data table regarding the Drying time. For new materials or applications, the suitability must be confirmed by preliminary tests.

Features

Ready-to-Use Product Features

Good Machinability,

Good Paint Adhesion,

Medium Viscosity

Features & Benefits

Labeling Claims

N-Methyl-2-Pyrrolidone (NMP)-free,

Nonylphenol Ethoxylates (NEP)-free,

Sustainable,

Toluene-free,

Benzene, Toluene, Xylene (BTX)-free

Product Features

• Contains polyvinyl chloride (PVC) for improved adhesive
• properties
• Free of BTX
• Free of THF
• Free of NEP
• Fluorescent (for process control)

Packaging & Availability

Regional Availability

• Europe
• India/MiddleEast/Africa (IMEA)

Physical Properties

Physical Form

Liquid

Properties

Typical Properties

	Value	Units	Test Method / Conditions
Density	0.9	g/cm³	DIN EN ISO 2811-1
Solid Content	14	%	Internal HBF Standard

Processing Properties

	Value	Units	Test Method / Conditions
Drying Time (at 70°C)	20 - 30	s	-
Processing Temperature	15 - 25	°C	-
Storage Temperature	5 - 35	°C	-
Viscosity (at 20°C)	50	s	DIN 4, DIN EN ISO 2431
Weight Per Unit Area (Wet)	30 - 50	g/m²	-

Storage & Handling

Storage Information

Intrafol™ 1175 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).

Technical Details & Test Data

Processing Information

Suitable Substrates	Polyvinyl chloride (PVC)
Suitable Adhesives	Edge banding hot melts (e.g. EVA, APAO, reactive PUR)
Consistency	Liquid
Surface Requirements	Dry Free of grease Free of dust Free of oil
Application Method	Roller coating
Application Equipment	Doctor blade

 

• Preparation - Intrafol™ 1175 must be stirred well before use
• Frost protection Protect Intrafol™ 1175 strictly from frost, product will be damaged.