HS Butyl Fleeceband 0318

Identification

Backing Material

Polypropylene (PP),

Polyester,

Fleece

Chemical Family

Butyl Rubber

GBU

BAS

RTU Product Type

Tape

Categories

Markets → Automotive & Transportation → Applications → Automotive → Exterior & Body

Markets → Automotive & Transportation → Applications → Bonding & Assembly → Sealants

Markets → Automotive & Transportation → Applications → Transportation → Commercial

Markets → Automotive & Transportation → Applications → Transportation → Marine

Markets → Automotive & Transportation → Applications → Transportation → Off Road & Recreational Vehicle (RV)

Markets → Building & Construction → Applications → Building Materials → Interior Fixtures

Markets → Building & Construction → Applications → Building Materials → Pipes & Plumbing

Technologies → Adhesives & Sealants → Product Families → Pressure Sensitive Adhesives, Tapes & Labels → Tapes

Applications

Application Area

Bathrooms,

Drains,

Crack Filling,

Recreational Vehicles,

Joints,

Caravans

Applications & Uses

Application Instructions

Surface preparation

• All surfaces should be clean, dry, and free from frost, grease, and loose materials.
• When cleaning contaminated substrates, HS Butyl recommends using propan-2-ol (IPA) and allowing it to dry before applying the butyl tape.
• When applying the tape to porous or friable surfaces, it is recommended to treat the surface with a suitable primer, such as an exterior grade PVA, to seal and stabilise the surface.

Application

• Remove the release paper and apply the tape to the substrates to be joined.
• Take care to avoid rucks in the tape.
• Roll the tape with a small roller to ensure good adhesion along the whole length of the tape.

Product Application

• For sealing floor-to-wall joints and around drains in wet rooms.
• For sealing cracks prior to plastering.
• For sound-deadening applications.
• For applications to prevent air leakage.

Features

Ready-to-Use Product Features

Conformable,

Flexible,

Ease Of Use,

Excellent Multi-Substrate Adhesion

Features & Benefits

Product Features

• Good adhesion to a wide range of substrates.
• Remains flexible throughout its service life.
• The product is highly conformable.
• Easy and accurate to use with little waste and no mess.
• The fleece will accept paint, plaster, cement, and adhesives.

Packaging & Availability

Regional Availability

• Asia Pacific
• Europe
• Global
• North America
• Latin America
• India/MiddleEast/Africa (IMEA)

Packaging Information

HS Butyl Fleeceband 0318 is normally supplied as a preformed strip on a siliconised release paper. A wide range of dimensions can be supplied. Product dimensions will determine the number of rolls per carton.

Properties

Product Tolerance

• Thickness: ±10%

Width:

• Up to 100mm: ±2mm
• Over 100mm: ±3mm

Performance Properties

	Value	Units	Test Method / Conditions
Density	1.6	g/cm³	HS Butyl Test Method 6
Dynamic Shear Strength	12	N/cm²	HS Butyl Test Method 15
Nominal Service Temperature	-40 to 90	°C	-
Peel Strength (180° peel adhesion)	9	N/cm	HS Butyl Test Method 41
Peel Strength (90° peel adhesion)	8	N/cm	HS Butyl Test Method 48
Water Vapor Transmission Rate	0.18	g/m²/24h/mm	BS ISO 15106, ISO 9932

Application Properties

	Value	Units	Test Method / Conditions
Application Temperature	5 - 40	°C	-

Regulatory & Compliance

Certifications & Compliance

ISO 9001

Storage & Handling

Storage Condition

24 months when stored flat in original packaging in cool, dry conditions.

Shelf Life

24 months