EY3010

Identification

Chemical Family

Epoxy & Epoxy Derivatives

GBU

EA

RTU Product Type

2K (2 component) Adhesive,

Epoxy Adhesive,

Reactive Adhesive,

Structural Adhesive

Categories

Markets → Automotive & Transportation → Applications → Transportation → Aerospace & Aviation

Markets → Building & Construction → Applications → Building Envelope & Roofing → Glazing & Window Elements

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → 2K Liquid Reactive Adhesives

Technologies → Adhesives & Sealants → Product Families → Functional Adhesives → Structural Adhesives

Applications

Application Area

Aerospace Applications

Compatible Substrates & Surfaces

Metal,

Plastics,

Composites

Segment

Aerospace

Applications & Uses

General Instructions

Surfaces must be clean, dry and free from grease, oil, paint, wax and weak oxide films and other surface contaminants. Chemical etching, sanding or grit blasting often gives the best results. Bring both components to room temperature prior to mixing. Just prior to using, blend the two components, Part A and Part B, in the ratio above. Mechanical mixing is preferable, but should be carried out at slow speeds (<300 rpm), taking as little air as possible into the adhesive batch. Spread a thin layer of the mixed adhesive on one or both of the parts to be bonded. Once the adhesive is applied, no open time is necessary. The surfaces can be assembled immediately. Parts should be assembled while the adhesive is still wet to the touch before it sets. The individual parts, the ambient temperature and the adhesive itself will dictate the open time permitted.

Features

Ready-to-Use Product Features

Chemical Resistant,

Flame Retardant,

Good Sagging Resistance,

Good Thermal Stability,

High Strength,

Light Weight,

Self Extinguishing,

Thixotropic,

Room Temperature Curing

Features & Benefits

Labeling Claims

Low VOC

Features and Benefits

• Excellent Sag Resistance Even Through Powder Coating Processes
• Extremely Light Weight
• Self Extinguishing
• Excellent Bonding to Metals, Composites, Coatings, and Most Plastics
• Excellent Chemical Resistance
• Excellent Thermal Performance
• Meets NASA limits for Low Volatile Content Required for Space Applications
• Room Temperature Cure

Packaging & Availability

Regional Availability

• Asia Pacific
• Europe
• North America
• Latin America
• India/MiddleEast/Africa (IMEA)

Physical Properties

Color (Properties)

Off White

Physical Form

Paste

Appearance

Light blue Liquid

Properties

Density:

580 kg/m³

Specific Gravity:

0.58

Specifications

LAC 30-8036 A, COMS-0006 REV.B, CASA I+D-N-200 Z-18.167/1 REV.3

Cured Properties

	Value	Units	Test Method / Conditions
Hardness	68	Shore D	ASTM D2240
Operating Temperature	- 55 to 150	°C	-
Specific Gravity	0.58	-	-

Uncured Properties

	Value	Units	Test Method / Conditions
Cure Time (at 23°C, full uncured)	7	days	-
Cure Time (at 66°C, full uncured)	3	hours	-
Gel Time	20 - 25	minutes	-
Mix Ratio (by weight)	100:8	-	-

Cured Mechanical Properties

	Value	Units	Test Method / Conditions
Overlap Shear Strength (at 50% RH, aluminum, acid etched)	11	MPa	ASTM D1002

Typical Properties

	Value	Units	Test Method / Conditions
Storage Temperature	12 - 25	°C	-

Rheological Properties

	Value	Units	Test Method / Conditions
Viscosity (mixed)	Soft Paste	-	-

Appearance

Light blue liquid

Storage & Handling

Storage Conditions

Product should be stored in a cool dry place out of direct sunlight. The shelf life is from date of manufacture. Shelf life is based on the products being stored properly at temperatures between 12°C and 25°C. Exposure to temperatures above 25°C will reduce the shelf life. This product should not be frozen.

Shelf Life

12 months