Cyberbond 2999

Identification

Chemical Family

Cyanoacrylates

GBU

HHC

RTU Product Type

1K (1 component) Adhesive,

Reactive Adhesive,

Solvent free (100% Solids) Adhesive

Categories

Markets → Automotive & Transportation → Applications → Bonding & Assembly → Transportation Assembly

Markets → Automotive & Transportation → Applications → Transportation

Markets → Building & Construction → Applications → Building Materials → Construction Adhesives

Markets → Electrical & Electronics → Applications → Packaging & Assembly → Adhesives & Sealants

Markets → Healthcare & Pharma → Applications → Medical → Medical Devices & Assemblies

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Industrial Adhesives & Sealants

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → 1K Liquid Reactive Adhesives

Application Information

Cure Method

Moisture Cure

Applications

Application Area

Medical Devices,

Industrial Assembly,

Automotive Applications,

Construction Applications,

Transportation Application,

Electronic Assemblies

Compatible Substrates & Surfaces

Leather,

Metal,

Paper,

Plastics,

Wood,

Brass,

Copper,

Elastomers & Rubbers,

Steel,

Bronze,

Galvanized Steel,

Ethylene Propylene Diene Monomer (EPDM),

Cardboards,

Aluminum Alloys,

Alloy Steel

Segment

Medical

Applications & Uses

General Instructions

Surfaces to be bonded should be clean and dry. Dispense a drop or drops to one surface only. Apply only enough to leave a thin film layer after compression. Press parts together and hold firmly for a few seconds. Good contact is essential. An adequate bond develops in less that one minute and maximum strength is attained in 24 hours. Wipe off excess adhesive from the top of the container and recap. products if left uncapped may deteriorate by contamination from moisture in the air. Because products cure by polymerization, whitening may appear on the surface of the container or the bonded materials. This will not affect adhesive performance.

Features

Ready-to-Use Product Features

Chemical Resistant,

Fast Setting,

Good Gap Filling Capabilities,

High Viscosity,

Surface Insensitive,

Fast Bonding

Packaging & Availability

Regional Availability

• Europe
• India/MiddleEast/Africa (IMEA)

Physical Properties

Color (Properties)

Translucent

Physical Form

Gel

Properties

Density:

1060 kg/m³

Flash Point:

85 °C

Shear Strength:

18.8097 MPa

Specific Gravity:

1.06

Viscosity:

9500~20500 cps

Cured Properties

	Value	Units	Test Method / Conditions
Cure Time (full)	24	hours	-
Service Temperature Range	- 55 to 95	°C	-

Typical Properties

	Value	Units	Test Method / Conditions
Fixture Time	50	seconds	-
Shear Strength***	2730	psi	-
Storage Temperature	15.5 - 25	°C	-
Temperature Range	-67 to 203	°F	-

Technical Data

	Value	Units	Test Method / Conditions
Specific Gravity	1.06	-	-

Uncured Properties

	Value	Units	Test Method / Conditions
Flash Point	85	°C	-
Set Time (Acrylonitrile Butadiene Styrene)	18	seconds	-
Set Time (Ethylene Propylene Diene Monomer)	15	seconds	-
Set Time (steel, uncured)	50	seconds	-

Performance Properties

	Value	Units	Test Method / Conditions
Pressure (performance of cured adhesive, ABS)	1740 - 2660	psi	ASTM 4501
Pressure (performance of cured adhesive, PC)	3240 - 3605	psi	ASTM 4501
Pressure (performance of cured adhesive, PVC)	2660 - 3875	psi	ASTM 4501
Pressure (performance of cured adhesive, aluminum)	1510 - 1920	psi	ASTM 4501
Pressure (performance of cured adhesive, rubber)	630 - 2200	psi	ASTM 4501
Pressure (performance of cured adhesive, steel)	2000 - 2730	psi	ASTM 4501

Rheological Properties

	Value	Units	Test Method / Conditions
Viscosity	9500 - 20500	cPs	-

Processing Parameters

	Value	Units	Test Method / Conditions
Service Temperature	- 55 to 95	°C	-
Setting Time	5 - 10	s	EPDM
Setting Time	13 - 15	s	acrylonitrile butadiene styrene (ABS)
Setting Time (Steel)	45 - 120	s	-
Setting Time (wood beech)	80 - 120	s	-
Viscosity (at 20°C 158 1/S, Cone-Plate)	3,000 - 6,000	mPa·s	Cone Plate
Viscosity (at 20°C, 1 1/s)	35,000 - 60,000	mPa·s	Cone Plate

Physical Properties

	Value	Units	Test Method / Conditions
Density	1.08	g/cm³	-
Flash Point	82.5	°C	-

Regulatory & Compliance

Certifications & Compliance

ISO 10993,

ISO 13485

Storage & Handling

Storage Conditions

Containers should be stored in a cool, dry, dark area. Storage temperature 15.5°C - 25°C (60°F - 77°F), without exposure to direct light or heat. Do not refrigerate.

Shelf Life

12 months (uncured), 12 months (unopened, 20 °C)

Technical Details & Test Data

Curing Performance

Ambient surface moisture initiates the curing process. Handling strength is reached in a short time, and will vary based on environmental conditions, bond line gap, and other factors. Product will continue to cure for at least 24 hours before full strength and solvent resistance is developed.

Heat Aging (aged at temperature indicated and tested at 22°C)

Hot Strength (%RT strength, tested at temperature)

Performance Range by Substrate (N/mm²)

Performance of Cured Adhesive

Substrate	N/mm²	PSI
Steel	13.8 to 18.8	2000 to 2730
Rubber*	4.3 to 15.2	630 to 2200
AL	10.4 to 13.2	1510 to 1920
PC**	22.3 to 24.9	3240 to 3605
PVC**	18.3 to 26.7	2660 to 3875
ABS**	12 to 18.3	1740 to 2660

 

*Rubber figures given are typical. Your results may vary by specific rubber type.
**Tested to ASTM 4501
***n/r = not recommended

Solvent Resistance

Solvent	Example	Resistance
Alcohol	Ethanol, Methanol	+ + +
Ester (aromatic)	Ethylacetate	+ + +
Ketone (aromatic)	Acetone, Benzophenone	– – –
Aliphatic hydrocarbon (alkanes)	Petrol, Heptanes, Hexane	+ + –
Aromatic hydrocarbons	Benzyl, Toluol, Xylol	+ + –
Halogenated hydrocarbons	Methylenchloride, Chloroform, Chlorobenzol	– – –
Weak aqueous	Nitrite, muriatic acid, sulphuric acid, phosphoric acid	+ + + (– – – if concentrated)
Weak aqueous base	sodium hydroxide solution, caustic potash	+ + + (– – – if concentrated)

Time Until Full Cure (% of RT strength)