Enifix 333

Identification

Chemical Family

Polychloroprenes

GBU

BAS

RTU Product Type

Contact Adhesive,

Laminating Adhesive,

Solventborne Adhesive

Categories

Markets → Building & Construction → Applications → Building Materials → Wood

Markets → Building & Construction → Applications → Infrastructure, Roads & Paving → Repair & Rehabilitation

Markets → Consumer Goods → Applications → Carpet & Upholstery

Markets → Consumer Goods → Applications → Furniture

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Contact Adhesives

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Nonreactive Adhesives

Applications

Application Area

Carpets,

Skirtings,

Furniture,

Upholstery,

Laminates,

Veneering

Application Method

Brush,

Roller

Compatible Substrates & Surfaces

Leather,

Metal,

Textiles,

Wood,

Composites,

Elastomers & Rubbers,

Foam,

Polyesters,

Concrete,

Cork,

Linoleum,

Formica,

Chipboard

Applications & Uses

Application Procedure

The surface should be structurally sound, clean, dry, levelled and free from dust, curing compounds, grease and other loose debris.

Apply ENIFIX 333 evenly with a brush or roller evenly on both surfaces, wait until the solvent has fully evaporated. After the evaporation of the solvent in adhesive, assemble the surface by applying normal hand pressure. Special care must be taken on the edges and adhesive must be evenly applied.

Note: The adhesive and the parts to be bonded must be at room temperature for optimum results (do not use below 10°C). The relative humidity must be below 65% to avoid formation of bubbles in the final product. The final bonding strength will depend on the pressure applied. Therefore, press across the entire surface as firmly as possible.

Product Applications

• ENIFIX 333 is an ideal product for bonding PVC skirtings, veneer, hardboard, Formica, linoleum, leather, rexine, rubber, cork, textile or polyester foam to self and to wood, chipboard, metal and concrete.
• ENIFIX 333 is also an excellent product for bonding carpets, stair carpets, furniture tips and felt patches.
• ENIFIX 333 can also be used for bonding shoes, toys and handicrafts.

Features

Ready-to-Use Product Features

Chemical Resistant,

Easy Film Formation,

Good Adhesion,

Good Bonding Strength,

Heat Resistance,

High Performance,

Low Odor,

Fast Drying,

Solvent-Based,

High Initial Tack

Features & Benefits

Labeling Claims

Lead-free,

Asbestos-free,

Mercury-free

Product Features

• Excellent Adhesion and High Bonding Strength
• Excellent Bonding to Porous and Non-Porous Surfaces
• Suitable for Material under Tension & Permanently Flexible
• Wide range of Applications
• Excellent Heat Resistance
• Instant Load Bearing
• Chemical Resistant
• Very Low Odor
• Excellent Tack
• Fast Drying

Packaging & Availability

Packaging Type

Cans

Regional Availability

• India/MiddleEast/Africa (IMEA)

Packaging Information

650 ml Metal Can (12 pcs per box).

Physical Properties

Physical Form

Liquid

Appearance

Yellow Liquid

Properties

Specifications

	Value	Units	Test Method / Conditions
Coverage (subject to surface condition)	2 - 4	m²/L	-
Density	0.80 - 0.90	kg/L	ASTM D 1475-98
Open Time	approx. 10 - 25	minutes	-
Solid Content	18 - 22	%	ASTM D 1644-01
Temperature Resistance	- 40 to 70	°C	-
Viscosity	2500 - 3000	cPs	ASTM D 2196

Typical Properties

	Value	Units	Test Method / Conditions
Storage Temperature	10 - 35	°C	-

Appearance

Yellow liquid

Storage & Handling

Storage Conditions

• 12 months from date of manufacturing in original unopened containers.
• Store under cover, protect from direct sunlight and high temperature.
• Store product at 10°C to 35°C for maximum storage life.
• Higher temperatures reduce normal storage life.
• Lower temperatures may cause increased viscosity of a temporary nature.
• Rotate stock on a “first in-first out” basis.

Shelf Life

12 months