Cyberbond CB AL 6070
1 of 68 products in this brandChemical Family: Methacrylates, Methyl Methacrylate Homopolymer
Compatible Substrates & Surfaces: Acrylonitrile Butadiene Styrene (ABS), Alloy Steel, Aluminum Alloys, Composites, Galvanized Steel, Metal, Plastics, Polyamide, Polycarbonate (PC), Poly(Methyl Methacrylate) (PMMA), Polyvinyl Chloride (PVC)
Features: Low Odor, Medium Viscosity, Short Open Time, Weak Acid Resistant, Weak Base Resistant
-
Type Document Name
-
Technical Data SheetCyberbond CB AL 6070 Technical Data Sheet
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
-
Application Information
- Cure Method
Applications
- Application Area
- Compatible Substrates & Surfaces
Applications & Uses
- Clean Surface
-
Surfaces should be clean, dry and free of grease before bonding.
- Technical User Information
-
- 2-component methacrylate adhesives belong to the group of reactive adhesives.
- The reaction starts by mixing hardener and resin. Cyberbond offers these adhesives in double cartridges with a 1:1 or 10:1 ratio along with static mixing tubes. This allows for easy and quick application.
- Methacrylate adhesives are available in different viscosities, ranging from liquid to paste-like, and with varying curing times. They are characterized by excellent adhesion to metals, many plastics, and composite materials.
- The mechanical properties range from flexible to rigid.
Features
- Ready-to-Use Product Features
Features & Benefits
- General Information about MMA adhesives
-
2-component methacrylate adhesives belong to the group of reactive adhesives. The reaction starts by mixing hardener and resin. Cyberbond offers these adhesives in double cartridges in 1:1 or 10:1 ratio with static mixing tubes. This allows an easy and quick application. Methacrylate adhesives are available in different viscosities from liquid to paste-like and with different curing times. They are characterized by excellent adhesion to metals, many plastics and composite materials. The mechanical properties range from flexible to rigid.
Packaging & Availability
- Regional Availability
Physical Properties
- Physical Form
Properties
- Application Temperature:
-
-40~120 °C
- Density:
-
1070 kg/m³
- Shelf Life:
-
12 months
- Specific Gravity:
-
1.07
- Tensile Modulus:
-
800~1200 MPa
- Tensile Strength:
-
17~20 MPa
- Viscosity:
-
10.000~20.000 cps
- Physical Properties
-
Value Units Test Method / Conditions Cure Time (full, polymer) 24 hours - E-Modulus (polymer) 800 - 1200 MPa - Elongation at Break (polymer) 5 - 10 % - Fixture Time (liquid state) 3 - 5 minutes - Flash Point 50 °F - Mix Ratio (liquid state) 1:1 - - Open Time (liquid state) 1 - 3 minutes - Temperature Range (polymer) -40 to 120 °C - Tensile Strength (polymer) 17 - 20 MPa - Viscosity (at 20°C, 0.5 s⁻¹) 10000 - 20000 mPa.s Cone-Plate Viscometer Viscosity (at 20°C, 160 s⁻¹) 5000 - 8000 mPa.s Cone-Plate Viscometer - Typical Properties
-
Value Units Test Method / Conditions Storage Temperature 10 - 20 °C - - Component A
-
Value Units Test Method / Conditions Density 1.07 g/cm³ - - Cured Properties
-
Value Units Test Method / Conditions Lap Shear Strength (acrylonitrile butadiene styrene (ABS), substrate fracture) 8 mPa - Lap Shear Strength (aluminium) 16 mPa - Lap Shear Strength (poly(methyl methacrylate) (PMMA), substrate fracture) 9 mPa - Lap Shear Strength (polycarbonate (PC), substrate fracture) 8 mPa - Lap Shear Strength (polyvinyl chloride (PVC), substrate fracture) 9 mPa - Lap Shear Strength (stainless steel) 19 mPa -
Safety & Health
- Safety Information
-
- Keep the workplace clean and use in well ventilated areas only. Installll suitable exhaust system at the workplace.
- Wear suitable safety glasses and gloves.
- Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
Storage & Handling
- Storage Condition
-
- Cyberbond CB AL 6070 should be used within the shelf life specified on the packaging.
- The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).
- This product should be stored unopened in a cool, dry place out of direct sunlight.
- Storage Conditions
-
Store products in a cold and dark place at temperatures between 10 °C to 20 °C.
- Shelf Life
-
12 months
Technical Details & Test Data
- Solvent Resistance
-
Solvent resistance Resistance level Examples Weak aqueous acid Excellent Diluted nitrite, muriatic acid, sulphuric acid, phosphoric acid
Concentrated acid Poor Nitric acid, muriatic acid, sulfic acid, phosphoric acid
Weak aqueous base Excellent Diluted sodium hydroxide solution, caustic potash solution
Concentrated base Poor Sodium hydroxide solution, caustic potash solution
Polar solvents Poor - Technical Information
-
Adhesive performance Tensile Shear Strength
Substrate, Result N/mm² Tensile shear strength (Polycarbonate,Fail) 5 - 10 Tensile shear strength (PMMA, Fail) 7 - 10 Tensile shear strength (ABS, Fail) 5 - 10 Tensile shear strength (PVC, Fail) 7 - 10 Tensile shear strength (Stainless steel) 16 - 22 Tensile shear strength (Aluminum) 14 - 18 Tensile Shear Strength
Resistance Against Solvents
Solvent Resistance Weak acids very good Weak bases very good Polar solvents limited Strong acids and bases limited Measurement of Viscosity
Viscosity describes the flow-ability of a liquid. Cyberbond measures the viscosity of the products by means of the cone/plate method: the liquid is applied on a panel and a defined cone presses the liquid together and rotates. Newtonian fluids are measured at shear rate 160 s-1, thixotropic products are measured at shear rate 0,5 s-1 and 160 s-1. The viscosity is measured in mPa*s at 20 °C.