BAMFutura® 46
1 of 6 products in this brandRTU Product Type: Hot Melt Adhesive
Features: Low Application Temperature, Non-Tainting
-
Type Document Name
-
Technical Data SheetBAMFutura® 46 (EN) Technical Data Sheet
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Segment
Applications & Uses
- Application Instructions
-
Recommended application temperature: between 110°C and 140°C depending upon the application conditions and substrates to be bonded. All our hot melt adhesives are formulated to minimise the risk of degradation at elevated temperatures. However, to ensure clean running keep to the suggested application temperature, check thermostats regularly and never exceed 200°C.
- Typical Applications
-
Developed as a low application temperature mPO based packaging adhesive, with good general purpose performance and is suitable for high speed applications.
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Characteristics
-
- Suitable for high speed and precise applications
- Non-tainting for confectionary
- Low application temperature
Packaging & Availability
- Regional Availability
Physical Properties
- Physical Form
- Appearance
-
Water white pastilles
Properties
- Typical Properties
-
Value Units Test Method / Conditions Adhesive Open Time Short - - Application Temperature 110 - 140 °C - Molten Tack Medium - - Softening Point 90 °C - Storage Temperature 5 - 30 °C - Viscosity (at 120°C) 1295 cPs Brookfield Viscometer - Appearance
-
Water white pastilles
Storage & Handling
- Storage Conditions
-
In original sealed packaging protected from sun, dust, moisture, and high temperatures. Clean and dry conditions above +5°C and below +30°C. Use oldest stock first.
- Shelf Life
-
3 years