H.B. Fuller

Categories: Markets → Building & Construction → Applications → Building Envelope & Roofing → EIFS & Insulation

Markets → Building & Construction → Applications → Building Materials → Construction Adhesives

Markets → Building & Construction → Applications → Building Materials → Wood

Markets → Building & Construction → Applications → Decorative Materials & Finishes → Carpet

Markets → Building & Construction → Applications → Decorative Materials & Finishes → Wallcoverings & Decorative Laminates

Markets → Building & Construction → Applications → Flooring & Surfaces → Other Flooring & Surface Applications

Markets → Consumer Goods → Applications → Carpet & Upholstery

Markets → Consumer Goods → Applications → Furniture

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Contact Adhesives

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Nonreactive Adhesives

Application Area: Laminates
Application Method: Spray
Compatible Substrates & Surfaces: Metal,

Plastics,

Elastomers & Rubbers,

Fibers & Fabrics,

Foam,

Concrete,

Expanded Polystyrene (EPS),

Cardboards,

Foils,

Plywood,

Medium-Density Fibreboard (MDF)

Guidelines for Use

Preparation:(500ml)

Use in a well Ventilated Area.
Surfaces to be bonded should be clean, dry and dust free. If cleaning solvents are used, allow adequate time for drying and wipe surface with a clean cloth before applying adhesive.
Shake aerosol before use.

Application:

Hold the aerosol at 70° to the surface, approximately 4-6 inches away and apply a uniform coat of adhesive to both substrates. Move at a steady pace that provides an even coat of adhesive without allowing any material to puddle. Spray one surface vertically the other horizontally. On porous materials, a second coat of adhesive may be necessary.
Allow the solvents to evaporate from the adhesive (1-2 minutes depending on ambient temperature). To know when the adhesive is ready to bond, it should not transfer to a gloved hand when touched and should feel dry. Bonding the substrates before the solvents have been allowed to evaporate can cause solvent entrapment resulting in bond failures.
Bring the two substrates together in the exact position and apply a uniform pressure to the entire area.
Full cure will take 24 hours.
After use, invert the can and spray to clear any adhesive from the valve/button.

Ready-to-Use Product Features: Good Bonding Strength,

Heat Resistance,

High Performance,

High Solids Content,

Very Good Heat Resistance,

Fast Drying,

Long Open Time,

Easy To Apply,

Fast Grab,

Excellent Multi-Substrate Adhesion

Labeling Claims

Chlorinated Solvents-free,

Product Features

Versatile: ideal for bonding a wide variety of substrates
High performance: incredible grab, high bond strength and excellent heat resistance, with a heavier adhesive coat
Easy to apply: spray application and combines a long open time with a very fast drying time
Innovative solvent system: lower health hazards compared to traditional Non-Chlorinated alternatives

Country Availability

India

Regional Availability

Packaging Size

Available Sizes:

Typical Properties


	Value	Units	Test Method / Conditions
Application Temperature	15 - 25	°C	-
Base	Acetal	-	-
Coverage (500ml aerosol)	approx. 6	m²/L	-
Curing Time	24	hours	-
Drying Time	1 - 2	minutes	-
Heat Resistance	100	°C	-
Open Time (protected from contamination)	1	hour	-
Solid Content	35	%	-
Storage Temperature	15 - 35	°C	-

Disposal Information

Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).

Storage & Shelf Life

Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.

Shelf Life

12 months

Tuskbond XPR0 GOLD - 500ml Aerosol