Tuskbond V15 - 500ml Aerosol

Identification

Chemical Family

Acrylics & Acrylates

GBU

BAS

RTU Product Type

Adhesive

Categories

Markets → Building & Construction → Applications → Flooring & Surfaces → Other Flooring & Surface Applications

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Nonreactive Adhesives

Applications

Application Area

Floor Coverings,

Tile

Application Method

Spray

Compatible Substrates & Surfaces

Vinyl,

Tile

Applications & Uses

Guidelines for Use

Preparation:

• Use in a well Ventilated Area.
• Shake well before use.
• Surfaces should be clean, dry and free from grease.

Application:

• Hold the aerosol at approximately 70° to the surface. Spray adhesive from 6-8 inches away onto one or both surfaces.
• Apply adhesive in 4-6 inch bands overlapping each band by roughly 50%, with a double coat applied to the edges. Move at a steady pace that provides an even coat of adhesive without allowing any material to puddle. For most applications, 80-100% adhesive coverage is required for full bond strength. On porous materials, a second coat of adhesive may be necessary.
• For one-way application, let adhesive dry for 30 seconds until tacky, and then press into position.
• For two-way application, spray both surfaces and allow to dry for 2-5 minutes before bonding.
• For temporary bonding, spray one surface and allow to dry for 2-5 minutes before bonding.
• After use, invert the can and spray to clear any adhesive from the valve/button.

Features

Ready-to-Use Product Features

Fast Drying,

Easy To Apply

Features & Benefits

Product Features

• Specific development: vinyl sheet and tile adhesive
• Versatile: suitable for use on a wide variety of substrates
• Reduces project time: fast, easy application, with a fast drying time

Packaging & Availability

Country Availability

India

Regional Availability

• Europe
• India/MiddleEast/Africa (IMEA)

Packaging Size

Available Sizes:
500ml aerosol

Physical Properties

Physical Form

Aerosol

Properties

Application Temperature:

15.0~25.0 °C

Drying Time:

0.0041675~0.08335 hours

Shelf Life:

12.0 months

Typical Properties

	Value	Units	Test Method / Conditions
Application Temperature	15 - 25	°C	-
Base	Synthetic polymer	-	-
Drying Time	0.5 - 5	minutes	-
Storage Temperature	15 - 35	°C	-

Storage & Handling

Disposal Information

• Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
• Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).

Storage & Shelf Life

• Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
• Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.

Shelf Life

12 months