Tuskbond NC101 - 500ml Aerosol
1 of 57 products in this brandTuskbond NC101 - 500ml Aerosol is a non-chlorinated sprayable contact adhesive developed to bond a wide variety of substrates. It has excellent grab and a long open time, providing a strong and permanent waterproof bond. It is ideal for permanent bonds that require good initial bond strength. It provides good temperature resistance and, if protected from contamination, has an open time of several hours.
RTU Product Type: Contact Adhesive
Compatible Substrates & Surfaces: Fibers & Fabrics, Foam, Foils, Medium-Density Fibreboard (MDF), Metal, Mineral Fiber, Plywood
Application Method: Spray
Features: Fast Grab, Good Bonding Strength, Heat Resistance, High Performance, Long Open Time, Non-Chlorinated, Temperature Resistance, Very Good Heat Resistance, Waterproofing
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
-
Applications
- Application Method
- Compatible Substrates & Surfaces
Applications & Uses
- Guidelines for Use
-
Preparation:(500 ml Aerosol)
- Use in a well Ventilated Area.
- Surfaces to be bonded should be clean, dry and dust free.
- Shake aerosol before use.
Application:
- Hold the aerosol at approximately 70° to the surface.
- Apply adhesive to both substrates in 4-6 inch bands overlapping each band by roughly 50%, with a double coat applied to the edges. Move at a steady pace that provides an even coat of adhesive without allowing any material to puddle. Spray one surface vertically the other horizontally. For most applications, 80-100% adhesive coverage is required for full bond strength. On porous materials, a second coat of adhesive may be necessary.
- Allow the solvents to evaporate from the adhesive (3-5 minutes depending on ambient temperature). To know when the adhesive is ready to bond, it should not transfer to a gloved hand when touched and should feel dry. Bonding the substrates before the solvents have been allowed to evaporate can cause solvent entrapment resulting in bond failures.
- Bring the two substrates together and apply a uniform pressure over the work piece, starting in the middle and working outwards. Pay particular attention to the edges.
- After use, invert the can and spray to clear any adhesive from the valve/button.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
- Product Features
-
- High performance: excellent bond strength, high heat resistance and long open time
- Versatile: bonds a wide variety of substrates
- Product credentials: non-chlorinated system and dichloromethane-free
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Size
-
Available Sizes:
- 500ml Aerosol
Physical Properties
- Physical Form
Properties
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 15 - 25 °C - Base Hydrocarbon, Acetone - - Coverage (500ml aerosol, dry coat weight of 25g/m²) approx. 5 m²/L - Curing Time 24 hours - Drying Time 3 - 5 minutes - Heat Resistance 95 °C - Open Time (protected from contamination) 1 hour - Solid Content 30 % - Storage Temperature 15 - 35 °C -
Storage & Handling
- Disposal Information
-
- Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
- Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).
- Storage & Shelf Life
-
- Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
- Stored under the correct conditions, in original. unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.
- Shelf Life
-
12 months