Tuskbond EPDM Primer - 22L Canister
1 of 57 products in this brandTuskbond EPDM Primer - 22L Canister is a quick and easy solution designed to increase the adhesion potential of EPDM and other roofing membranes. Offering a fast and easy alternative to standard roll on primers, Tuskbond EPDM primer will increase the speed, quality and precision of a contractor’s work. The primer is quick drying, ready to work on within minutes and each 22L canister will cover an area of 250 m² reducing both working time and overall cost.
RTU Product Type: Primer
Application Area: Roofing Membranes
Compatible Substrates & Surfaces: Concrete, Ethylene Propylene Diene Monomer (EPDM), Metal, Wood
Features: Easy To Apply, Fast Drying
Application Method: Spray
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Guidelines for Use
-
Preparation:
- Use in a well Ventilated Area.
- Surfaces to be bonded should be clean, dry and dust free.
- Once the hose and gun has been attached to the canister, open the valve fully. Check the connection points for leaks at this time.
- On first use, the canister may initially take a few seconds to spray correctly. Spray initially onto on a scrap surface to ensure the spray pattern is correct for the application. The trigger restrictor on the gun can be used to set the spray to the required width.
Application:
- Hold the spray gun at 90° to the surface, approximately 4-6 inches away and apply a uniform coat of primer, covering the entire surface.
- Allow the solvents to evaporate from the primer (3-5 minutes depending on ambient temperature). To know when the primer is ready, it should not transfer to a gloved hand when touched and should feel dry.
- Once the primer is dried, it is ready to be worked on. Avoid contaminating the primed area with dust as much as possible, as this will impair performance.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
- Product Features
-
- Excellent coverage: 250m² coverage (based on 10g per m² dry coat weight)
- Minimises task time: fast, easy application, with a quick drying time
- Product credentials: free from chlorinated solvents
Packaging & Availability
- Regional Availability
- Packaging Size
-
Available Sizes:
22L Canister
Physical Properties
- Physical Form
Properties
- Application Temperature:
-
15.0~25.0 °C
- Cure Time:
-
24.0 hours
- Shelf Life:
-
12.0 months
- Solid Content:
-
30.0 %
- Specifications
-
Value Units Test Method / Conditions Application Temperature 15 - 25 °C - Coverage (22L) 11.36 m²/L - Curing Time 24 hours - Drying Time 3 - 5 minutes - Heat Resistance 95 °C - Open Time (protected from contamination) 1 hour - Solid Content 30 % - Storage Temperature 15 - 35 °C - - Technical Data
-
Value Units Test Method / Conditions Base Dichloromethane - -
Storage & Handling
- Disposal Information
-
- Once the canister is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
- Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).
- Storage & Shelf Life
-
- Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
- Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.
- Shelf Life
-
12 months