Swift®tak 1004 ​
1 of 79 products in this brandSwift®tak 1004 is a water-based polymer solution adhesive that offers excellent lamination performance across all makes of machines. It generates low foam at high speeds and is a concentrated adhesive that can be diluted with a maximum of 6 parts water. It is commonly used for laminating bath, kitchen, and AFH (away from home) tissue paper products.
RTU Product Type: Waterborne Adhesive
Application Area: Bath Tissue, Lamination, Paper Converting, Paper Towel, Tissue Paper
Compatible Substrates & Surfaces: Paper
Features: Cost Effective, Excellent Performance, Good Bonding Strength, Good Machine Compatibility
-
Type Document Name
-
Sell SheetH.B. Fuller General Laminating Sell Sheet
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Product Applications
-
- Lower temperatures than recommended can cause higher viscosity which result in reduced bond strength and reduced wetting.
- Depending on the construction of the equipment, a continuous heat- ing above processing temperature can cause decomposition of the adhesive.
- Tank melters should use protective gases with < 5 ppm humidity, only.
- Clean tools immediately after use.
- Once cured, the material can only be removed mechanically.
Features
- Ready-to-Use Product Features
Packaging & Availability
- Regional Availability
Properties
- Technical Data
-
Value Units Test Method / Conditions Density 1.048 g/cm³ - Solid Content 19 v% - Storage Temperature 18.3 - 29.4 °C - Viscosity 17000 mPa·s - pH 5 - -
Storage & Handling
- Shelf Life
-
3 months