Swift®col 9787

Identification

Carrier

Solvent-based

Chemical Family

Acrylics & Acrylates

GBU

HHC

RTU Product Type

Pressure Sensitive Adhesive,

Solventborne Adhesive

Categories

Markets → Printing & Packaging → Applications → Tapes, Labels & Adhesives → Tapes & Labels

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Reactive Adhesives

Technologies → Adhesives & Sealants → Product Families → Pressure Sensitive Adhesives, Tapes & Labels → Pressure Sensitive Adhesives

Applications

Application Area

Graphic Processors

Compatible Substrates & Surfaces

Paper,

Textiles,

Elastomers & Rubbers,

Polyvinyl Chloride (PVC),

Polyurethane,

Polypropylene (PP),

Polyethylene (PE),

Polyethylene (PE) Film,

Plastic Film,

Polyester Films

Segment

Tapes, Labels, and Graphics

Applications & Uses

Product Application

Suitable to produce tapes, film or labels based on the below substrates.

Suitable Substrates: Natural and synthetic textiles, plastic films (PVC, polyethylene, Polypropylene, Polyester, etc.); paper, expanded materials (PE, PP, PU, rubber, etc.).

Application Instructions: Product should be coated with proper coating equipment to release paper or release film. After being dried it should be coupled with substrate. It could also be applied to the substrate. It is very important that the adhesive is perfectly dry before lamination. In fact, traces of residual solvent could inhibit cross-linking of the polymer, which leads to a decrease of technical characteristics comparing to the specifications. Product can be diluted with different solvents such as ketones, aromatic hydrocarbons, and esters. Mix of aliphatic hydrocarbons also can be used for dilution. Solvents must be anhydrous. Product can be cross-linked using liquid Isocyanate.

Suggestions:

• Use only dry solvents. Introduction of water can compromise cross- linking process of the polymer
• Don’t mix with other adhesive without previous tests needed to verify compatibility and stability over time.

Cleaning Instructions: For cleaning of machineries and tools we suggest the use of acetone since this solvent coagulate the adhesive and help its removal.

Features

Ready-to-Use Product Features

Good Aging Behavior,

Good Cohesion,

Good Shrinkage Resistance,

Heat Resistance,

Improved Adhesion,

Self Curing Capable,

Tacky,

Good Peeling Strength,

Solvent-Based,

Plasticizer Resistance

Features & Benefits

Key Benefits

Swift®col 9787 is a tackified, solvent-based, pressure-sensitive adhesive designed to maintain long-lasting adhesive bonds, particularly in demanding outdoor applications.

• Good heat resistance and aging properties
• Stability against plasticizers
• Good shrinkage resistance
• Very high peel strength with good balance between cohesion and tack
• Works well on low surface energy substrates

Product Characteristics

Very high adhesion performance with good balance between cohesion and tack.

Packaging & Availability

Regional Availability

• Asia Pacific
• Europe
• Global
• North America
• Latin America
• India/MiddleEast/Africa (IMEA)

Physical Properties

Physical Form

Liquid

Appearance

Yellowish / medium viscous liquid

Properties

Shelf Life:

12.0 months

Typical Properties

	Value	Units	Test Method / Conditions
Density (at 20°C)	approx. 0.93	g/cm³	-
Solids Content	45 - 47	%	-
Storage Temperature	5 - 35	°C	-
Viscosity (at 25°C)	1000 - 3000	mPa·s	-

Appearance

Yellowish / medium viscous liquid

Storage & Handling

Storage Information

The product in original sealed packaging protected from sun, dust, moisture, and high temperatures. The product to be stored in Clean and dry conditions above +5°C and below +35°C. Very low storage temperatures can lead to a reversible increase of viscosity to the product. Do not expose to heat.

Shelf Life

12 months