Swift®melt Earthic™ 9010E
1 of 79 products in this brandSwift®melt Earthic™ 9010E is a circular hot melt pressure-sensitive adhesive with ISCC+ certification. It features an excellent balance of adhesion and cohesion across various substrates, good performance at low temperatures, and over 70% fossil-free and sustainable raw materials.
RTU Product Type: Hot Melt Nonreactive Adhesive, Hot Melt Pressure Sensitive Adhesive, Label
Application Method: Roller, Slot-Die
Compatible Substrates & Surfaces: Paper, PET Film, Plastic Film, Polyethylene (PE), Polyethylene Terephthalate (PET), Polypropylene (PP)
Features: Good Adhesion, Good Cohesion, Good Machinability, Indirect Food Contact Acceptable, Low Temperature Performance
Enhanced TDS
Identification
- GBU
- RTU Product Type
Applications
- Application Method
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Application Instructions
-
Application: by slot die or roller coating at 150°C – 180°C (depending on the applicator type).
- Product Application
-
This grade has been developed for label stock production to be used for general purpose label application.
Suitable Substrates: Various types of plastic films like PE, PP, PET or paper.
Application Instructions: Application: by slot die or roller coating at 150°C – 180°C (depending on the applicator type).
- Typical Applications
-
This grade has been developed for label stock production to be used for general purpose label application.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
- Product Characteristics
-
- excellent balance of adhesion and cohesion to a wide range of substrates
- good adhesion at low temperatures
- high share of fossil-free and sustainable raw materials
- Product Characteristics
-
- excellent balance of adhesion and cohesion to a wide range of substrates
- good adhesion at low temperatures
- high share of fossil-free and sustainable raw materials (>70%)
- Product Highlights
-
Swift®melt Earthic™ 9010E is a sustainable pressure-sensitive hot melt adhesive that contributes to the replacement of fossil-fuel resources by renewable feedstocks. Designed to help customers lower the overall COâ‚‚ impact, this near carbon neutral* adhesive is produced in an ISCC+ certified facility and provides excellent adhesion at low temperatures. Suitable on a variety of sustainable substrates, Swift®melt Earthic™ 9010E wide range of requirements for the pressure-sensitive adhesive for label stock applications.
- Produced in an ISCC+ facility, providing full supply chain transparency.
- High share of fossil-free and sustainable raw materials (>70%).
- Good adhesion to a wide range of substrates. including various types of plastic films (PE, PP, PET) or paper.
- Excellent balance of adhesion and cohesion.
- Wide range of applications from fridge up to 60°C.
- Excellent machinability.
- Non-direct food contact compliance.
Note: * - Final calculations pending.
Packaging & Availability
- Packaging Type
- Regional Availability
Properties
- Shelf Life:
-
12.0 months
- Viscosity:
-
5000.0~8000.0 cps
- Note
-
Typical values only, slight variations may occur but will not affect product’s meeting the standard technical parameters as stated; please consult our CoA for more details (available on request).
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 150 - 180 °C - Base Synthetic rubber - - Softening Point 82 - 98 °C ASTM E28-99, Ring and Ball Test Storage Temperature 15 - 25 °C - Viscosity (at 160°C, spindle 27, 20rpm) 5000 - 8000 mPa.s Brookfield DV II
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Storage Conditions
-
In original sealed packaging protected from sun, dust, moisture, and high temperatures. Clean and dry conditions above +15°C and below +25°C.
- Storage Information
-
The product in original sealed packaging protected from sun, dust, moisture, and high temperatures. The product to be stored in Clean and dry conditions above +15°C and below +25°C.
- Shelf Life
-
12 months