Millennium One Step Foamable Adhesive®
1 of 23 products in this brandChemical Family: Urethanes
RTU Product Type: 2K (2 component) Adhesive, Elastomeric Adhesive, Foamable Adhesive, Reactive Adhesive, Structural Adhesive
Application Area: Base Sheets, Cover Boards, Insulation Board, Roof Decking, Roofing Substrates, Roofs
Application Method: Nozzle
Compatible Substrates & Surfaces: Asphalt, Cementitious Wood Fiber, Concrete, Gypsum, Gypsum Board, HD Wood Fiber, Metal, Mineral Wool, Modified Bitumen Membranes, Perlite, Polyisocyanurate, Polystyrene (PS), Steel, Textiles, Wood, Wool
Features: Absorbs Stress, Easy To Apply, Excellent Flexibility, Fast Application, Fast Setting, Flexible, Low Foaming, Solventless
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Application Method
-
1. Remove snap off tip from the One Step™ mixing head and keep for re-use.
2. Attach a One Step™ mixing nozzle to the threaded mixing head.
3. Place the cartridge into the appropriate One Step™ applicator. Caution: Adhesive should be dispensed immediately after loading the cartridge into the dispensing tool to prevent adhesive from foaming and curing in the mixing tip.
4. Apply Millennium One Step Foamable Adhesive® directly to the substrate, using a ribbon pattern. Space 1/4” to 1/2” (0.6cm to 1.3cm) wide beads, 12” (30cm) o.c., to achieve proper coverage rates for insulation attachment. As adhesive is applied, immediately place insulation board into wet adhesive. Do not allow the adhesive to skin over. Eliminate uneven surfaces to ensure positive contact between the insulation board and substrate.
5. Un-used material can be applied at a later date simply removing the used static mixing tip, wiping the neck of the cartridge clean and plugging the cartridges with provided snap off tips.
6. Caution: Millennium One Step Foamable Adhesive® reacts quickly in warm, moist climates. Roofers must set insulation boards quickly in these conditions.
- Approved Insulations and Substrates
-
- HD wood fiber
- Polyisocyanurate
- Perlite (upon approval)
- Polystirene
- Gypsum cover board
- Asphaltic cover boards
- Concrete
- Gypsum roof deck
- Cementitious wood fiber
- Wood or steel
- Mineral wool
- Lightweight insulating concrete
- Modified bitumen membranes
- and base sheets (sanded or granule surfaced)
- Approved insulations (multi-layer applications)
- Smooth or gravel surface built-up roof (re-roof applications)
- Basic Use
-
Millennium One Step Foamable Adhesive® is designed for use as an adhesive for bonding approved roof insulations to a building’s structural roof deck, base sheets, other insulation boards, and smooth or properly prepared graveled built-up roof surfaces.
Millennium One Step Foamable Adhesive® eliminates the need for mechanical fasteners that can often cause damage to the roof deck, which can reduce the roof’s service life.
- Equipment
-
The fast and dependable One Step™ applicators make applying Millennium One Step Foamable Adhesive® simple:
- Patented Multi-Bead Plus Applicator*
- Patented Multi-Bead Applicator**
- Battery Powered Single Bead Applicator
- Pneumatic Single Bead Applicator
- Ultra Drive Manual Applicator
- Heavy Duty Manual Applicator
- Limitations
-
- Do not apply to wet or damp surfaces.
- Not recommended for use with insulation boards larger than 4’ x 4’ (1.2m x 1.2m).
- Do not use warped or curled insulation boards. All insulation boards must lay flat upon the roof surface.
- When applying Millennium One Step Foamable Adhesive® over a smooth or sanded APP roof surface Millennium Surface Treatment may be required.
- Note
-
*US 9,381,536 B2
**US 7,056,556 B2; US D501,855 S; CA 2,493,739 C - Surface Preparation
-
All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven.
For applications over gravel surfaces apply Millennium Universal Primer prior to the application of Millennium One Step Foamable Adhesive®. For applications over fresh and/or non-oxidized asphalt, coal tar or plastic film membranes, Millennium Surface Treatment maybe required prior to the application of Millennium One Step Foamable Adhesive®.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
- Key Attributes
-
Features Benefits Replaces fastener plates Reduces thermal bridging maintaining the insulation integrity
No temperature restrictions Suitable for all climates
Solvent free Essentially VOC free, no odors
Elastomeric Remains flexible, absorbs stresses
Low rise foam Accommodates minor surface irregularities
Replaces fasteners Minimizes penetrations and deck corrosion
Identification & Functionality
- Product Image
-
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging and Coverage
-
Millennium One Step Foamable Adhesive® is available in the following package:
Cartridge Size Case Part # Cartridges/Case 1.5 Liter OS-FA15-04 4 Covers 600 sq ft (56m2) per case. Coverage estimates indicate total square feet of insulation attachment per case. Rates are based on an application pattern of 4 ribbons, 1/4” to 1/2” (0.6cm to 1.3cm) wide, 12”(30cm) o.c. per 4’ x 4’ (1.2m x 1.2m) insulation board. Coverage rates my be lower when used over irregular surfaces and will vary depending on roughness.
Physical Properties
- Color (Properties)
Properties
- Shelf Life:
-
18 months
- Typical Properties
-
Value Units Test Method / Conditions Storage Temperature 65 - 85 °F - Thermostat Temperature (internal) 29 - 38 °C -
Storage & Handling
- Storage Conditions
-
Keep temperature of contents between 65°F to 85°F (18°C to 29°C) 24 hours prior to use. Do not store in direct sunlight or temperatures higher than 90°F (32°C). Shelf life is 18 months in unopened original packaging when stored at 65°F to 85°F (18°C to 29°C).
- Shelf Life
-
18 months