Intrafol™ 1225

Identification

Chemical Family

Polyvinyl Chlorides (PVC)

GBU

BAS

RTU Product Type

1K (1 component) Coating,

2K (2 component) Coating,

Primer,

Solventborne Coating

Categories

Markets → Building & Construction → Applications → Building Materials → Wood

Markets → Consumer Goods → Applications → Furniture

Technologies → Ready-to-Use Products → Product Families → Paints & Coatings → Primers & Sealers

Applications

Application Area

Furniture,

Woodwork,

Panels,

Decorative Edges

Application Method

Roll Coater

Compatible Substrates & Surfaces

Wood,

Composites,

Acrylonitrile Butadiene Styrene (ABS)

Features

Ready-to-Use Product Features

Good Paint Adhesion,

Highly Versatile,

Medium Viscosity,

Medium Drying Time,

Non-Blocking

Features & Benefits

Labeling Claims

N-Methyl-2-Pyrrolidone (NMP)-free,

Nonylphenol Ethoxylates (NEP)-free,

Sustainable

Packaging & Availability

Regional Availability

• Asia Pacific
• Europe
• India/MiddleEast/Africa (IMEA)

Physical Properties

Physical Form

Liquid

Properties

Typical Properties

	Value	Units	Test Method / Conditions
Density	0.84	g/cm³	Internal HBF Standard
Drying Time (at 70°C, When applied to warm edge band, drying at room temperature may be sufficient.)	20 - 30	s	-
Processing Temperature	15 - 25	°C	-
Solid Content	14.3	%	Internal HBF Standard
Storage Temperature	5 - 35	°C	-
Viscosity (at 20°C)	40	s	Ford Cup 4
Viscosity (at 20°C)	35	s	DIN 53211 Cup 4
Weight Per Unit Area (Wet)	30 - 50	g/m²	-

Storage & Handling

Storage Information

Intrafol™ 1225 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature)

Technical Details & Test Data

Processing Information

Preparation

The surfaces to be bonded must be dry, free of grease, free of dust and free of oil.

Processing

Apply a thin and homogenous coat of Intrafol™ 1225 on the plastic surface and dry the applied film. Refer to the technical data table regarding the Drying time. For new materials or applications, the suitability must be confirmed by preliminary tests.

Processing Information

Suitable Substrates	Acrylonitrile butadiene styrene (ABS)
Suitable Adhesives	Edge banding hot melts (e.g. EVA, APAO, reactive PUR)
Consistency	Liquid
Surface Requirements	Dry
	Free of grease
	Free of dust
	Free of oil
Application Method	Roller coating
Hints	Allow the coated substrate to cool to room temperature before winding it up.
Preparation	Intrafol" 1225 must be stirred well before use