H.B. Fuller

Categories: Markets → Automotive & Transportation → Applications → Transportation → Off Road & Recreational Vehicle (RV)

Markets → Building & Construction → Applications → Building Envelope & Roofing → Shingles & Tiles

Markets → Building & Construction → Applications → Building Envelope & Roofing → Waterproofing & Weatherproofing

Markets → Building & Construction → Applications → Infrastructure, Roads & Paving → Repair & Rehabilitation

Technologies → Adhesives & Sealants → Product Families → Pressure Sensitive Adhesives, Tapes & Labels → Tapes

Application Area: Seam Sealing,

Roofs,

Joints,

Roof Joints,

Skylights,

Mobile Home Roofs,

Roof Tears,

RV Roofs,

Copings,

Flashings,

Gutters
Compatible Substrates & Surfaces: Metal,

Plastics,

Wood,

Aluminum,

Brick,

Asphalt,

Fiberglass,

Galvanized Steel,

Thermoplastic Polyolefin (TPO),

Polyvinyl Chloride (PVC),

Ethylene Propylene Diene Monomer (EPDM),

Polypropylene (PP),

Gypsum,

Polyethylene (PE),

Tile,

Concrete,

Masonry,

Styrene Butadiene Styrene (SBS),

Chlorosulfonated Polyethylene Synthetic Rubber (ACSM),

Hypalon,

Atactic Polypropylene (APP),

Chlorinated Polyethylene (CPE),

Shingles,

Oriented Strand Board (OSB),

Gypsum Board

Application Information: Surfaces must be clean and dry before applying WebSeal®. Install WebSeal® over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure using your hand or steel roller to activate bonding pro- cess. A topcoat is required for UV protection.
Basic Use: EternaBond® WebSeal® is used to seal roof joints (seams) and tears, flashings, copings, sky- lights, gutters, etc. Perfect for repairing and restoring roofs on mobile homes and RVs. Extremely flexible, with no memory, so WebSeal conforms to virtually any shape without springing back. WebSeal seals to itself so it can be cut and folded around an object. A top coat of roof coating is necessary for UV protection.
Product Limitations: EternaBond® WebSeal® is not compatible with silicone sealants or lubricants. Avoid using silicone based products near WebSeal®.
Surface Preparation: Surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil and grease, etc. with EternaClean or a non residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

Ready-to-Use Product Features: Flexible,

High Solids Content,

Low Temperature Flexibility

Composition: EternaBond® WebSeal® utilizes EternaBond's advanced MicroSealant Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber (non butyl) with a built in primer. It is bonded to a woven polyester backing for maximum conformability. The adhesive coating is protected by a silicone release liner, to be removed prior to application.

Country Availability

India

Regional Availability

Standard Roll Size

2", 4", 6", 8", 12", 24", 36" x 50'

Notes

*For best results, it is recommended to use a primer adhesive for temperature below 40°F. Keep tape at room temperature before applying.

Technical Data


	Value	Units	Test Method / Conditions
180° Peel (at 23°C)	5	pli	ASTM D413
Application Temperature Range*	4 - 65	°C	-
Flexibility Temperature Range	-70 to 200	°F	-
Service Temperature Limits	-40 to 100	°C	-
Water Vapor Transmission Rate (at 37.7°C)	0.005	g/100in²/24hrs	ASTM E96B

Typical Properties


	Value	Units	Test Method / Conditions
Storage Temperature	4 - 38	°C	-

Storage Conditions: Store material in original container at temperatures between 4°C and 38°C (40°F to 100°F). Shelf life is 5 years when stored as recommended.
Shelf Life: 5 years

EternaBond® WebSeal®